HK P30 TLR7/8 and high or low switch variants. RH ONLY. Please contact us if you need LH - email@example.com
This item is made of 0.08" coyote Kydex T. It is specifically made to fit the firearm listed. It is not designed to fit any other firearm other than what is listed.
The holster will be adjusted for the P30 with TLR7. If you have a TLR8, you will need to tighten the adjustment screw until you find your desired fitment.
Fitment of the holster is adjustable. It will have a default fit and loosening the adjustment screw will loosen the fit, while tightening it will make the fit tighter. Please take note that tighter fit will affect both insertion and extraction and how the draw stroke will affect user preference. The default adjustment is such that the firearm will not fall out if the holster was inverted and shaken.
It will utilize a pancake type design. It is modular and can be used in various configuration depending on attachment sets used. It can be OWB or IWB depending on user setup, by simply switching loop sets. It is portable in size making it highly concealable with unnoticeable imprint, but is also scalable and with proper setup can also be used for overt uniform and other tactical applications. It is user configurable for mode of carry with an angular adjustment range of + 10 degrees from zero.
All holsters will have a tactile distinguishable “click” during insertion of the gun, providing user feedback that the pistol has been stowed properly and “locked” in place. The tactile click will be felt even in complete darkness, unless user is wearing thick gloves. There will be a faint audible (depending on ambient noise) click. By definition of our quality, “locked” means that the gun and/or light/laser loaded with a full magazine, will not pop-out of the holster when the user is running or doing normal routine task.
The holster should also retain the gun and/or light/laser if inverted and shaken moderately. User feel of fitment may vary as each user will have a preference. This means that some user may think it is tight while others may feel it is loose. It will however meet the requirement for retention under normal hard use conditions. Fitment will require positive and deliberate draw stroke to pull the gun out of the holster. It will not accidentally drop out under its normal use per design.
Each holster will be specifically molded and crafted within very tight tolerance to ensure fitment, aesthetics, and form definition. This ensures compactness for concealability and comfortability for extended duration use.
Holsters will have polished edges, coated with PTFE, and exacting form definition in relation to the model of gun and light it is to be used for. PTFE can be reapplied on the discretion of the user. It prevents the dust and debris from accumulating and prevents excessive friction if a lighter draw stroke is desired.